Metric O-Ring Cross Section 2mm-2.9mm
An O-ring seal is a means for closing off a passageway to prevent an unwanted escape or loss of fluid or gasses. O-rings are measured I.D. (Inside diameter) and C.S. (Cross section or width) and come in many materials. The most common is Buna-N or Nitrile. We also stock: Viton, EPDM, Silicone, Teflon. Other materials are available. Please specify material when ordering or call for assistance. (see o-ring compound section) If you can’t find something you’re looking for, give us a call at 800-445-7803.
Product # |
Cross Section (Millimeter) | Internal Diameter (Millimeter) | |
|---|---|---|---|
| 2.3MM X 34MM | 2.3 | 34 | |
| 2.4MM X 11.8MM | 2.4 | 11.8 | |
| 2.4MM X 12.3MM | 2.4 | 12.3 | |
| 2.4MM X 13.3MM | 2.4 | 13.3 | |
| 2.4MM X 13.8MM | 2.4 | 13.8 | |
| 2.4MM X 14.3MM | 2.4 | 14.3 | |
| 2.4MM X 15.3MM | 2.4 | 15.3 | |
| 2.4MM X 16.3MM | 2.4 | 16.3 | |
| 2.4MM X 17.3MM | 2.4 | 17.3 | |
| 2.4MM X 18.3MM | 2.4 | 18.3 | |
| 2.4MM X 19.3MM | 2.4 | 19.3 | |
| 2.4MM X 20.3MM | 2.4 | 20.3 | |
| 2.4MM X 22.3MM | 2.4 | 22.3 | |
| 2.4MM X 23.3MM | 2.4 | 23.3 | |
| 2.4MM X 24.3MM | 2.4 | 24.3 | |
| 2.4MM X 25.3MM | 2.4 | 25.3 | |
| 2.4MM X 27.3MM | 2.4 | 27.3 | |
| 2.4MM X 3.3MM | 2.4 | 3.3 | |
| 2.4MM X 30.3MM | 2.4 | 30.3 | |
| 2.4MM X 33.3MM | 2.4 | 33.3 | |
| 2.4MM X 4.3MM | 2.4 | 4.3 | |
| 2.4MM X 5.3MM | 2.4 | 5.3 | |
| 2.4MM X 5.6MM | 2.4 | 5.6 | |
| 2.4MM X 5.6MM | 2.4 | 5.6 | |
| 2.4MM X 54.6MM | 2.4 | 54.6 |