Metric O-Ring Cross Section 5mm-5.9mm
An O-ring seal is a means for closing off a passageway to prevent an unwanted escape or loss of fluid or gasses. O-rings are measured I.D. (Inside diameter) and C.S. (Cross section or width) and come in many materials. The most common is Buna-N or Nitrile. We also stock: Viton, EPDM, Silicone, Teflon. Other materials are available. Please specify material when ordering or call for assistance. (see o-ring compound section) If you can’t find something you’re looking for, give us a call at 800-445-7803.
Product # |
Cross Section (Millimeter) | Internal Diameter (Millimeter) | |
|---|---|---|---|
| 5.33MM X 142.8MM | 5.33 | 142.8 | |
| 5.33MM X 155MM | 5.33 | 155 | |
| 5.33MM X 167.7MM | 5.33 | 167.7 | |
| 5.7MM X 104.2MM | 5.7 | 104.2 | |
| 5.7MM X 109.2MM | 5.7 | 109.2 | |
| 5.7MM X 114.2MM | 5.7 | 114.2 | |
| 5.7MM X 119.2MM | 5.7 | 119.2 | |
| 5.7MM X 119.3MM | 5.7 | 119.3 | |
| 5.7MM X 129.2MM | 5.7 | 129.2 | |
| 5.7MM X 129.6MM | 5.7 | 129.6 | |
| 5.7MM X 132.2MM | 5.7 | 132.2 | |
| 5.7MM X 134.2MM | 5.7 | 134.2 | |
| 5.7MM X 134.3MM | 5.7 | 134.3 | |
| 5.7MM X 139.2MM | 5.7 | 139.2 | |
| 5.7MM X 139.6MM | 5.7 | 139.6 | |
| 5.7MM X 144.2MM | 5.7 | 144.2 | |
| 5.7MM X 149.2MM | 5.7 | 149.2 | |
| 5.7MM X 174.2MM | 5.7 | 174.2 | |
| 5.7MM X 184.3MM | 5.7 | 184.3 | |
| 5.7MM X 189.2MM | 5.7 | 189.2 | |
| 5.7MM X 189.3MM | 5.7 | 189.3 | |
| 5.7MM X 194.2MM | 5.7 | 194.2 | |
| 5.7MM X 199.2MM | 5.7 | 199.2 | |
| 5.7MM X 204.2MM | 5.7 | 204.2 | |
| 5.7MM X 219.3MM | 5.7 | 219.3 |