Fastener and Fitting Seals
Stat-O-Seals - are one piece molded in place seals with the rubber sealing element mechanically locked in the metal retainer. They are designed to seal beneath the head of the fastener for both internal and external pressure systems. Thredseals - are mechanical not chemical in application. They can be assembled and removed, do not need "set-up" time and are easily parted from contacting surfaces with out special tools or chemicals. This makes it possible to gain access to sealed areas. Note: Some minimums may apply. If you can’t find something you’re looking for, give us a call at 800-445-7803.
 |
7500 Thred SealsThred Seals are reusable, safe, reliable seals for threaded devices. Their design is unique. Can be used for sealing directly against threads. Require no special machining or style of bolt, screw or thread. They are self centering, non-directional and are low in original cost; can provide considerable savings because they make possible the use of low standard fasteners and full threaded fittings. No special tools or skill is needed to assemble - simply push them on with a slight twisting motion, and tighten fastner. If you can’t find something you’re looking for, give us a call at 800-445-7803. |
 |
Stat-O-SealWe stock the most standard material: Metal: Steel Protective Finish: Cadmium Plate Rubber Compuund: Nitrile (Buna-N) Usage: Industrial for weather and petroleum fluids. - 65 F to + 225 F Water and many other fluids suitable with lower maximum temperature. If you can’t find something you’re looking for, give us a call at 800-445-7803. |