Pip Rings
The PIP seal combines a Type B loaded u-cup (PolyPak) with a pressure inverted pedestal which will convert the Type B seal into a bi-directional device.The PIP seal needs only a single groove and can be installed on one-piece pistons in most cases, thus saving space, increasing the bearing length of the piston and reducing the number of piston components involved. A PIP seal can be installed in a bi-directional seal system replacing two standard PolyPaks at a considerable savings in both machining and seal cost. Note: Some minimums may apply. If you can’t find something you’re looking for, give us a call at 800-445-7803.
 |
Pip Rings 1/8" Cross SectionIf you can’t find something you’re looking for, give us a call at 800-445-7803. |
|
Pip Rings 3/16" Cross SectionIf you can’t find something you’re looking for, give us a call at 800-445-7803. |
|
Pip Rings 1/4" Cross SectionIf you can’t find something you’re looking for, give us a call at 800-445-7803. |
|
Pip Rings 5/16" Cross SectionIf you can’t find something you’re looking for, give us a call at 800-445-7803. |
|
Pip Rings 3/8" Cross SectionIf you can’t find something you’re looking for, give us a call at 800-445-7803. |
|
Pip Rings 1/2" Cross SectionIf you can’t find something you’re looking for, give us a call at 800-445-7803. |
|
Pip Rings 5/8" Cross SectionIf you can’t find something you’re looking for, give us a call at 800-445-7803. |